Please use this identifier to cite or link to this item:
|標題:||CF4 plasma treatment for preparing gas diffusion layers in membrane electrode assemblies||作者:||Pai, Y.H.
|關鍵字:||plasma surface modification;wet-proofed gas diffusion layer;hydrophobic property;water management;pem fuel-cells;water transport;ultra-low;performance;flow||Project:||Journal of Power Sources||期刊/報告no：:||Journal of Power Sources, Volume 161, Issue 1, Page(s) 275-281.||摘要:||
The hydrophobic properties of carbon fibers improved by a CF4 plasma treatment were used to fabricate gas diffusion layers (GDLs) for use in proton exchange membrane fuel cells. The water contact angle of the CF4 plasma treated GDL was measured as 132.8 +/- 0.2 degrees at 45 degrees C and very few surface gas diffusion pores were either sealed or blocked by the excessive hydrophobic material residuals. Polarization measurements verified that the CF4 plasma treated modules can indeed enhance fuel cell performance, compared to the membrane electrode assemblies (MEAs) with a non-wet-proofed GDL, 10 wt% PTFE dip-coated GDL, and commercially available GDL (10 wt% PTFE). (c) 2006 Elsevier B.V. All rights reserved.
|Appears in Collections:||工學院|
Show full item record
TAIR Related Article
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.