Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/68438
標題: Flow behaviour of high strength high-performance concrete
作者: Yen, T.
Tang, C.W.
Chang, C.S.
Chen, K.H.
關鍵字: rheology;Bingham model;high strength high-performance concrete;mix;proportions;two-point test;fresh concrete;rheological properties
Project: Cement & Concrete Composites
期刊/報告no:: Cement & Concrete Composites, Volume 21, Issue 5-6, Page(s) 413-424.
摘要: 
The workability of flowable High-Performance Concrete (HPC) is nowadays mainly measured using conventional test methods such as the slump lest or the slump-flow test. These single-point tests do not seem sensitive enough to characterize the high-workability of HPC. Due to the fluid consistency and uniformity of fresh HPC, it is possible to describe its flow properties by using a rheological test method. To evaluate the flowability based on rheology, fresh HPC is regarded as a two-phase material composed of a matrix phase and a particle phase. In the study, the effects of materials and proportioning on the rheological properties were investigated experimentally. A new rheometer was established by conducting a two-point test to Investigate the flow behaviour of high strength HPC. Test results show that the high strength HPC with good uniformity and without tendency of segregation can possess the properties of rheology according to Bingham's equation. An increase of the fraction of mortar in HPC can lead to a more distinct the rheological behaviour. Moreover, it is found that the application of a rheological method can provide more stable results than any other test method in describing the flowability of high strength HPC. (C) 1999 Elsevier Science Ltd. All rights reserved.
URI: http://hdl.handle.net/11455/68438
ISSN: 0958-9465
DOI: 10.1016/s0958-9465(99)00026-8
Appears in Collections:期刊論文

Show full item record
 

Google ScholarTM

Check

Altmetric

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.