Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/68447
標題: Effects of milling on the physicochemical characteristics of waxy rice in Taiwan
作者: Chen, J.J.
Lu, S.
Lii, C.Y.
關鍵字: particle-size;gelatinization;starch;flour
Project: Cereal Chemistry
期刊/報告no:: Cereal Chemistry, Volume 76, Issue 5, Page(s) 796-799.
摘要: 
Three types of mills and six milling methods were employed to mill two waxy rice varieties (TCSW1, long grain; TCW70, short grain), and the physicochemical and functional properties of rice flour were examined. The results showed that dry-milling maintained a higher level of the chemical components than other milling methods. Wet-milling slightly increased solubility as test temperatures increased, and significantly increased swelling power at 75 and 85 degrees C for TCSW1 and TCW70, respectively. Hammer and semi-dry hammer milling gave higher percentages of coarse particles (100-300 mu m); cyclone and turbo milling led to a more even particle-size distribution, and the wet-milling gave the finest particles (10-30 mu m) Dry hammer-milled rice had higher gelatinization and pasting temperatures, and semi-dry grinding milling resulted in the lowest pasting temperature, setback viscosity, and enthalpy value among the mills. The final quality of the two waxy rice varieties was profoundly affected by the mill type and milling method.
URI: http://hdl.handle.net/11455/68447
ISSN: 0009-0352
DOI: 10.1094/cchem.1999.76.5.796
Appears in Collections:期刊論文

Show full item record
 

Google ScholarTM

Check

Altmetric

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.