Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/68679
標題: Structure and characterization of the multilayered Ti-DLC films by FCVA
作者: Lin, Y.H.
Lin, H.D.
Liu, C.K.
Huang, M.W.
Chen, J.R.
Shih, H.C.
關鍵字: Diamond-like carbon (DLC);Ti-DLC;Filtered cathodic vacuum arc (FCVA);diamond-like carbon;tetrahedral amorphous-carbon;cathodic vacuum-arc;c-n films;mechanical-properties;nanocomposite films;ion-implantation;field-emission;deposition;cathodoluminescence
Project: Diamond and Related Materials
期刊/報告no:: Diamond and Related Materials, Volume 19, Issue 7-9, Page(s) 1034-1039.
摘要: 
This work presents a simple approach for the synthesis of multilayered titanium-diamond-like carbon (multilayered Ti-DLC) films on a Si substrate by a filtered cathodic vacuum arc (FCVA) system using Ti-coated graphite target to supply carbon as well as the dopant titanium. This study focuses on the characterization of microstructure, surface roughness, mechanical strength and electrical resistivity. The results indicated that the multilayered Ti-DLC films exhibit better mechanical properties than the Ti-free and Ti-implanted DLC films, and both multilayered Ti- and Ti-implanted DLC films have similar Ti atomic concentrations. The surface roughness of the multilayered Ti-DLC films shows a value much lower than the other films. The film microstructure consists in TiC nanocrystals precipitated in the amorphous carbon matrix with a multilayered structure. Because of the high hardness and low roughness, the multilayered Ti-DLC films can be used as biomedical, wear-resistant and solid lubricant coatings. (C) 2010 Published by Elsevier B.V.
URI: http://hdl.handle.net/11455/68679
ISSN: 0925-9635
DOI: 10.1016/j.diamond.2010.02.014
Appears in Collections:期刊論文

Show full item record
 

Google ScholarTM

Check

Altmetric

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.