Please use this identifier to cite or link to this item:
|標題:||Determining GaInP/GaAs HBT device structure by DC measurements on a two-emitter HBT device and high frequency transit time measurements||作者:||Meng, C.C.
|關鍵字:||GaInP/GaAs HBT;emitter ledge;transit time measurement;ledge schottky diode;bipolar-transistors;base||Project:||Ieice Transactions on Electronics||期刊/報告no：:||Ieice Transactions on Electronics, Volume E88C, Issue 6, Page(s) 1127-1132.||摘要:||
A method to monitor the GaInP/GaAs HBT device structure including emitter ledge thickness is demonstrated in this paper. The base thickness and base doping density are obtained through base transit time and base sheet resistance measurements while the base transit time is measured through the cut-off frequency measurements at various bias points. A large size two-emitter HBT device is used to measure the ledge thickness. Emitter doping profile and collector doping profile are obtained by the large size HBT device through C-V measurements. An FATFET device formed by two emitters as drain and source terminals and the interconnect metal as the on-ledge Schottky gate between two emitters is used to measure the ledge thickness.
|Appears in Collections:||期刊論文|
Show full item record
TAIR Related Article
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.