Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/69504
標題: Predictions of swirling flow in sudden-expansion dump combustor with flameholder side-inlet using two-step combustion model
作者: Chuang, S.H.
Yang, C.S.
Wu, N.J.
關鍵字: flow;combustion;premixed combustion;coaxial jets;flowfield;field
Project: International Journal of Numerical Methods for Heat & Fluid Flow
期刊/報告no:: International Journal of Numerical Methods for Heat & Fluid Flow, Volume 9, Issue 7, Page(s) 764-787.
摘要: 
The swirling flaw of sudden-expansion dump combustor with central V-gutter flameholder and six side-inlets is studied by employing the SIMPLE-C alogrithm and Jones-Launder k-epsilon two-equation turbulent model, Both combustion models of one-step with infinite chemical reaction rate and two-step with finite chemical reaction rate of eddy-breakup (EBU) model are used to solve the present problem. The results agreed well with available prediction data in terms of axial-velocity and total pressure coefficient along combustor centerline. The flowfield structure of combustor considered is strongly affected by swirling, flameholder and side-inlet flow. For the fixed strength of swirling, the length of central circulation zone is decreased when the angle of V-gutter is increased. The outlet velocity of combustor in reacting flow is higher than that in cold flow because the released heat of combustion causes the decrease of density throughout the combustor flowfield. The distribution of mass fraction of various species in reacting process depends on the mixing effect, chemical kinetic and the geometric configuration of combustor.
URI: http://hdl.handle.net/11455/69504
ISSN: 0961-5539
DOI: 10.1108/09615539910291154
Appears in Collections:期刊論文

Show full item record
 

Google ScholarTM

Check

Altmetric

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.