Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/70128
標題: The effect of bending loads on the dynamic behaviors of a rolling guide
作者: Wu, J.S.S.
Chang, J.C.
Tsai, G.A.
Lin, C.Y.
Ou, F.M.
關鍵字: Linear guide;Hertz contact theory;Contact stiffness;ball-bearings;vibration
Project: Journal of Mechanical Science and Technology
期刊/報告no:: Journal of Mechanical Science and Technology, Volume 26, Issue 3, Page(s) 671-680.
摘要: 
Dynamic behaviors of ball-type contact surfaces under unbalanced bending loads are studied using point-to-point analysis, three-dimensional finite element simulation based on the Hertz Contact Theory, and a modal test. Results derived from these models are very similar but the Finite Element Model provides the best results since it allows for more elements of study, such as the steel ball, carriage, rail etc. In the study, results also show that frequencies vary slightly, but there is an obvious change in shapes. Therefore, the contact stiffness in simulations must be properly selected with the conclusion that different external loadings may affect the dynamic characteristics of such structures significantly.
URI: http://hdl.handle.net/11455/70128
ISSN: 1738-494X
DOI: 10.1007/s12206-011-1228-8
Appears in Collections:期刊論文

Show full item record
 

Google ScholarTM

Check

Altmetric

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.