Please use this identifier to cite or link to this item:
|標題:||Patterning of FePt for magnetic recording||作者:||Li, G.J.
|關鍵字:||FePt;Fct phase;Thermal patterning;Self-assembly;Lithography;iron-oxide;thin-films;nanoparticles;lithography;fabrication;media;phase;nm;diffraction;resolution||Project:||Thin Solid Films||期刊/報告no：:||Thin Solid Films, Volume 519, Issue 23, Page(s) 8307-8311.||摘要:||
Higher areal density for magnetic recording is needed to provide larger storage capacities on harddisk drives. However, as the recording bit size of traditional magnetic recording materials (such as Co/Cr) approaches 10 nm. the magnetic direction of each recording bit would become unstable at room temperature due to thermal fluctuation. To solve this problem, efforts have been made using two methods: one method is to replace the disk media with new materials possessing higher magnetic anisotropy which would lead to better thermal stability: and the second one is to employ different configurations for the recording layer. FePt with patterned media configuration is a combination of these two methods. In this paper we review some novel and interesting methods of patterning FePt for magnetic recording, including thermal patteming, self-assembly patterning, and lithography patterning. (C) 2011 Elsevier B.V. All rights reserved.
|Appears in Collections:||期刊論文|
Show full item record
TAIR Related Article
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.