Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/71497
標題: Rapid thermal melted TiO2 nano-particles into ZnO nano-rod and its application for dye sensitized solar cells
作者: Chao, C.H.
Chang, C.L.
Chan, C.H.
Lien, S.Y.
Weng, K.W.
Yao, K.S.
關鍵字: TiO2 nano-particles;ZnO nano-rod;Dye sensitized solar cells;thin-films;temperature;electrodes;light;injection;growth;array
Project: Thin Solid Films
期刊/報告no:: Thin Solid Films, Volume 518, Issue 24, Page(s) 7209-7212.
摘要: 
TiO2 nano-particles with an anchored ZnO nano-rod structure were synthesized using the hydrothermal method to grow ZnO nano-rods and coated TiO2 nano-particles on ZnO nano-rods using the rapid thermal annealing method on ITO conducting glass pre-coated with nano porous TiO2 film. The XRD study showed that there was little difference in crystal composition for various types of TiO2 nano-particles anchored to ZnO nano-rods. The as-prepared architecture was characterized using field-emission scanning electron microscopy (FE-SEM). Films with TiO2 nano-particles anchored to ZnO nano-rods were used as electrode materials to fabricate dye sensitized solar cells (DSSCs). The best solar energy conversion efficiency of 2.397% was obtained by modified electrode material, under AM 1.5 illumination, achieved up to J(sc) = 15.382 mA/cm(2), V-oc = 0.479 V and fill factor = 32.8%. (C) 2010 Elsevier B.V. All rights reserved.
URI: http://hdl.handle.net/11455/71497
ISSN: 0040-6090
DOI: 10.1016/j.tsf.2010.04.081
Appears in Collections:期刊論文

Show full item record
 

Google ScholarTM

Check

Altmetric

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.