Please use this identifier to cite or link to this item: http://hdl.handle.net/11455/72299
標題: 脫層複材層疊板補片修補之有限元素分析模式
作者: 林義雄
林見昌
關鍵字: 多層膠合複材層板;補片;膠合
出版社: 國立中興大學工學院;Airiti Press Inc.
Project: 興大工程學刊, Volume 11, Issue 1, Page(s) 61-74.
摘要: 
Finite element models for multilayered adhesive-bonded composite laminated plates are
established for analyzing single-sided and double-sided repair composite laminated plates with
delamination. The model is based on the Reissner-Mindlin plate theory with an assumed variation of
the transverse shear and normal stresses through the thickness of layer. The generalized stress strain
relations of multilayered adhesive-bonded composite laminated plates are established by using a
variational principle. According to this formulation, finite element models for multilayered
adhesive-bonded composite laminated plates are developed. The buckling load and mode shape of
single-sided and double-sided repair composite laminated plates with delamination can be obtained by
the present method. The study also explores the influences of patch thickness on buckling load and
mode shape in repair composite laminated plates with delamination.

本文目的在建立多層膠合複合層板有限元素法模式,以分析利用單邊補片及雙邊
補片膠合補強已脫層之複材層疊板,有限元素模式以Mindlin-Reissner板理論加入平面影
響,並考慮膠層橫向剪應力及橫向正應力在各層板厚度分佈,利用變分原理推導膠層與各
層板之廣義應力應變關係修正式,再以所建立公式推導多層膠合複材層板分析之有限元素
法。在本文中並分析以單邊補片及雙邊補片膠合補強脫層複材層疊板挫屈載重及挫屈型
態,並探討補片厚度對脫層複材板補強效果的影響。
URI: http://hdl.handle.net/11455/72299
ISSN: 1017-4397
Appears in Collections:第11卷 第1期
工學院

Files in This Item:
File SizeFormat Existing users please Login
141568-8.pdf758.03 kBAdobe PDFThis file is only available in the university internal network   
Show full item record
 

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.