Please use this identifier to cite or link to this item:
標題: Using Flexible Polyimide as a Substrate to Deposit ZnO:Ga ThinFilms and Fabricate p-i-n 𝛼-Si:H Thin-Film Solar Cells
Project: International Journal of Photoenergy, Volume 2013, Article ID 263213.
The GZO thin films were deposited on the polyimide (PI) substrates to investigate their properties for the possibly flexible applications. The effects of substrate temperature (from room temperature to 200°C) on the surface and cross-session morphologies, X-ray diffraction pattern, optical transmission spectrum, carrier concentration, carrier mobility, and resistivity of the GZO thin films on PI substrates were studied. The measured results showed that the substrate temperature had large effect on the characteristics of the GZO thin films. The cross-section observations really indicated that the GZO thin films deposited at 200°C and below had different crystalline structures. The value variations in the films’ optical band gap () of the GZO thin films were evaluated from plots of, revealing that the measured values increased with increasing deposition temperature. Finally, the prepared GZO thin films were also used as the transparent electrodes to fabricate the -Si amorphous silicon thin-film solar cells on the flexible PI substrates, and the properties of which were also measured. We would also prove that substrate temperature of the GZO thin films had large effect on the characteristics of the fabricated -Si amorphous silicon thin-film solar cells.
Appears in Collections:電機工程學系所

Files in This Item:
File Description SizeFormat Existing users please Login
2014-3-4-2-9-6.pdf2.7 MBAdobe PDFThis file is only available in the university internal network    Request a copy
Show full item record

Google ScholarTM


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.