Please use this identifier to cite or link to this item:
標題: Titanium Dioxide Nanoparticle Humidity Microsensors Integrated with Circuitry on-a-Chip
作者: Hu, Yu-Chih
Dai, Ching-Liang
Hsu, Cheng-Chih
Project: Sensors, Volume 14, Issue 3, Page(s) 4177-4188.
A humidity microsensor integrated with a readout circuit on-a-chip fabricated using the commercial 0.18 μm CMOS (complementary metal oxide semiconductor) process was presented. The integrated sensor chip consists of a humidity sensor and a readout circuit. The humidity sensor is composed of a sensitive film and interdigitated electrodes. The sensitive film is titanium dioxide prepared by the sol-gel method. The titanium dioxide is coated on the interdigitated electrodes. The humidity sensor requires a post-process to remove the sacrificial layer and to coat the titanium dioxide. The resistance of the sensor changes as the sensitive film absorbs or desorbs vapor. The readout circuit is employed to convert the resistance variation of the sensor into the output voltage. The experimental results show that the integrated humidity sensor has a sensitivity of 4.5 mV/RH% (relative humidity) at room temperature.
ISSN: 1424-8220
DOI: 10.3390/s140304177
Appears in Collections:機械工程學系所

Files in This Item:
File Description SizeFormat Existing users please Login
2015-3-4-6-4-6.pdf803.25 kBAdobe PDFThis file is only available in the university internal network   
Show full item record

Google ScholarTM




Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.