Please use this identifier to cite or link to this item:
標題: Tip Pressure on Semicircular Specimens in Tapping Mode Atomic Force Microscopy in Viscous Fluid Environments
作者: Shih, Hua-Ju
Dai, Ching-Liang
Shih, Po-Jen
關鍵字: atomic force microscopy;pressure;semi-analytical method;tapping mode;vorticity
Project: Sensors (Basel, Switzerland), Volume 17, Issue 10
Tapping mode (TM) atomic force microscopy (AFM) in a liquid environment is widely used to measure the contours of biological specimens. The TM triggers the AFM probe approximately at the resonant frequencies and controls the tip such that it periodically touches the specimen along the scanning path. The AFM probe and its tip produce a hydrodynamic pressure on the probe itself and press the specimen. The tip to specimen size ratio is known to affect the measurement accuracy of AFM, however, few studies have focused on the hydrodynamic pressure caused by the effects of specimen size. Such pressure affects the contour distortion of the biological specimen. In this study, a semi-analytical method is employed for a semicircular specimen to analyze the vorticity and pressure distributions for specimens of various sizes and at various tip locations. Changes in pressure distribution, fluid spin motion, and specimen deformation are identified as the tip approaches the specimen. The results indicate the following: the specimen surface experiences the highest pressure when the specimen diameter equals the tip width; the vorticity between tip and specimen is complex when the tip is close to the specimen center line; and the specimen inflates when the tip is aligned with the specimen center line.
DOI: 10.3390/s17102182
Appears in Collections:機械工程學系所

Files in This Item:
File Description SizeFormat Existing users please Login
sensors-17-02182.pdf期刊論文4.23 MBAdobe PDFThis file is only available in the university internal network   
Show full item record

Google ScholarTM




Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.