Please use this identifier to cite or link to this item:
標題: Riprap Protection in Controlling Local Scour at the Toe of a Groundsill
作者: Chia-Chun Wu
Ping-Chi Huang
Ya-Yun Wu
關鍵字: Riprap protection;local scour;riprap length;riprap size;groundsills;拋石保護;局部淘刷;拋石長度;拋石粒徑;固床工
Project: 中華水土保持, Volume 47, Issue 3, Page(s) 147-155.
An array of 1:50 scaled groundsill models was installed in a semi-circulating flume to study scour
mechanics and effectiveness of riprap protection lengths and riprap sizes. Results of this study show that riprap protection at the toe of a groundsill is unable to completely eliminate the local scour, but it is capable of reducing scour depth
and scour length. A dimensionless relationship was also derived in this study to help select riprap protection lengths
and riprap sizes. The maximum percent of scour depth reduction can be reduced from 83% to 76% with respect to the
increase of riprap size to channel sediment size ratio when riprap protection covers 1/4 of the groundsill interval. Percent
of reduction remains fairly constant when riprap protection covers 1/2 of the groundsill interval. On the other hand, the
maximum percent of scour length reduction increases from 64% to 84% with respect to the increase of riprap size to
channel sediment size ratio.

本研究利用 1:50 縮尺之系列固床工模型進行水工實驗,以探討拋石保護段長度及拋石粒徑大小對減
局部淘刷,但並不能完全消除。當拋石保護段的長度為固床工間距的 1/4 時,渠床淘刷深度的最大縮減百分
比隨著拋石粒徑與渠床床砂粒徑比的增加而從 83% 降低為 76%;當拋石保護段的長度為固床工間距的 1/2
砂粒徑比的增加由 64% 提高為 84%。
Appears in Collections:第47卷 第03期

Files in This Item:
File Description SizeFormat
97345-4.pdf4.67 MBAdobe PDFView/Open
Show full item record

Google ScholarTM


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.